Sign In | Join Free | My infospaceinc.com
China Hincn Limited logo
Hincn Limited
Hincn Limited
Verified Supplier

1 Years
Home > RF Power Amplifier >

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA

Product Categories
Hincn Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA

  • 1
  • 2

Brand Name : Hincn

Model Number : HCTD-4055-2

Place of Origin : China

MOQ : 1 pc

Price : US$579.00~US$629.00

Payment Terms : ,T/T,Western Union,MoneyGram,D/P,D/A,L/C

Supply Ability : 359pcs/month

Delivery Time : 7~14 working days

Packaging Details : carton package

Power : 2*2W

Frequency : 1420~1530MHz or other frequencies

Size : 40*55*12mm

Power supply voltage : 10~16V

Material : made of pure aluminum

RF connector : SMA or MCX

Contact Now

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA
Performance advantages
Extremely small size, dual-channel power amplifier (MIMO-PA), high linearity, extremely high reliability, no damage to the power amplifier even during open circuit or short circuit.
Specifications
  • Model number: HCTD-4055-2
  • Product name: TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA
  • High linearity
  • Number of channels: 2 channels, symmetrical on both left and right sides.
  • Transmission Power: Nominal 2W for 2 channels, typical value 2-3W*2 . This enables longer transmission distances and more stable wireless transmission.
  • Frequency range: 1420~1530MHz or other frequencies
  • Gain: ≥12dB± 0.5 dB (TX mode)
  • Shoulder ratio: ≥25~30dB (at 8MHz bandwidth, DVB-T, 2/8K mode modulation signal, Deviation from the center frequency 4.3MHz)
  • In-band fluctuations: ≤ ±1.25dB (typical value±0.75dB)
  • Input/output interface: SMA or MCX
  • TX Maximum input power: 25dBm*2 channel
  • RX Maximum input power: 20dBm*2 channel
  • Third order intermodulation: ≤-30~36dB@Pout=33dBm/ ≤-20~30dB@36dBm
  • ACPR: ≤-30~-36dB@Pout=33dBm/ ≤-20~30dB@36dBm
  • Harmonic suppression: ≤-30dBc
  • Output VSWR: ≤1.5 (load 50Ω)
  • Relative group delay: ≤20ns
  • RF switch switching time: turn on time≤1us / switch off time ≤0.2us
  • Power amplifier transmit-receive isolation degree: ≥45dB
  • Receive gain: 9± 2 dB* 2 or 2dB ± 0.5dB* 2 ( RX mode, the maximum gain of the low-noise amplifier can be set and changed according to the requirements up to 20dB).
  • Control mode: TTL 0/1.8～5V level (Or, automatic detection of the input power can be used to achieve automatic transmission and reception. However, the transmission delay will be slightly increased, but it can still be used normally. EN high level(1.5~5.5V): Power amplifier is in transmitting mode,but receiving is off. EN low level (0~1.0V) : Receiving status, but transmitting is off (power amplifier static current is less than 0.17A with low-noise amplifier )
  • Working temperature: -25~+85℃
  • Temperature protection: If the module temperature reaches 105 ± 5 degrees, the transmission will be automatically shut down and only reception will be enabled.
  • Supply voltage: 12V(10 - 16V ), the higher the voltage, the higher the output performance)
  • Working current: 1.25~2.1A *2 @ 2W *2
  • Volume: size with housing 40*55*12mm
  • Weight: 54g(with housing), 10g (bare board)

Product Tags:

2x2W dual channel RF power amplifier

      

MIMO linear RF amplifier 1420-1530MHz

      

digital RF power amplifier with warranty

      
Quality TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA for sale

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hincn Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like